Stat-Ease Blog

Welcome to our first Publication Roundup! In these monthly posts, we'll feature recent papers that cited Design-Expert® or Stat-Ease® 360 software. Please submit your paper to us if you haven't seen it featured yet!

Mark's comment: make sure to check out publication #4 by researchers from GITAM School of Science in Hyderabad, India. They provide all the raw data, the ANOVAs, model graphs and, most importantly, enhancing the quality of medicines via multifactor design of experiments (DOE).

1. Innovative study on chalcopyrite flotation efficiency with xanthate and ester collectors blend using response surface methodology (B.B.D): towards sustainability
   Scientific Reports volume 15, Article number: 65 (2025)
   Authors: Imkong Rathi & Shravan Kumar
   
2. Fabrication and In Vivo Evaluation of In Situ pH-Sensitive Hydrogel of Sonidegib–Invasomes via Intratumoral Delivery for Basal Cell Skin Cancer Management
   Pharmaceuticals 2025, 18(1), 31
   Authors: Maha M. Ghalwash, Amr Gamal Fouad, Nada H. Mohammed, Marwa M. Nagib, Sherif Faysal Abdelfattah Khalil, Amany Belal, Samar F. Miski, Nisreen Khalid Aref Albezrah, Amani Elsayed, Ahmed H. E. Hassan, Eun Joo Roh, & Shaimaa El-Housiny
   
3. Formulation development and evaluation, in silico PBPK modeling and in vivo pharmacodynamic studies of clozapine matrix type transdermal patches
   Scientific Reports volume 15, Article number: 1204 (2025)
   Authors: Abdul Qadir, Syed Umer Jan, Muhammad Harris Shoaib, Muhammad Sikandar, Rabia Ismail Yousuf, Fatima Ramzan Ali, Fahad Siddiqui, Abdul Jabbar Magsi, Ghulam Mustafa, Muhammad Talha Saleem, Shafi Mohammad, Mohammad Younis & Muhammad Arsalan
   
4. Unique Research for Developing a Full Factorial Design Evaluated Liquid Chromatography Technique for Estimating Budesonide and Formoterol Fumarate Dihydrate in the Presence of Specified and Degradation Impurities in Dry Powder Inhalation
   Biomedical Chromatography: Volume 39, Issue 2, February 2025
   Authors: Lova Gani Raju Bandaru, Naresh Konduru, Leela Prasad Kowtharapu, Rambabu Gundla, Phani Raja Kanuparthy, Naresh Kumar Katari
   
5. Synergistic effects of fly ash and graphene oxide composites at high temperatures and prediction using ANN and RSM approach
   Scientific Reports volume 15, Article number: 1604 (2025)
   Authors: I. Ramana & N. Parthasarathi
   
6. Enhancement Strategy for Protocatechuic Acid Production Using Corynebacterium glutamicum with Focus on Continuous Fermentation Scale-Up and Cytotoxicity Management
   International Journal of Molecular Sciences 2025, 26(1), 396
   Authors: Jiwoon Chung, Wooshik Shin, Chulhwan Park, and Jaehoon Cho
   
7. An exploration of RSM, ANN, and ANFIS models for methylene blue dye adsorption using Oryza sativa straw biomass: a comparative approach
   Scientific Reports volume 15, Article number: 2979 (2025)
   Authors: Sheetal Kumari, Smriti Agarwal, Manish Kumar, Pinki Sharma, Ajay Kumar, Abeer Hashem, Nouf H. Alotaibi, Elsayed Fathi Abd-Allah & Manoj Chandra Garg
   
8. Manipulated Slow Release of Florfenicol Hydrogels for Effective Treatment of Anti-Intestinal Bacterial Infections
   International Journal of Nanomedicine, Volume 2025:20, Pages 541—555, 13 January 2025.
   Authors: Luo W, Zhang M, Jiang Y, Ma G, Liu J, Dawood AS, Xie S, Algharib SA
   
9. Preparation of slow-release fertilizer derived from rice husk silica, hydroxypropyl methylcellulose, polyvinyl alcohol and paper composite coated urea
   Heliyon, Volume 11, Issue 2, 30 January 2025
   Authors: Idayatu Dere, Daniel T. Gungula, Semiu A. Kareem, Fartisincha Peingurta Andrew, Abdullahi M. Saddiq, Vadlya T. Tame, Haruna M. Kefas, David O. Patrick, Japari I. Joseph
   
10. Elimination of Ni(II) from wastewater using metal-organic frameworks and activated algae encapsulated in chitosan/carboxymethyl cellulose hydrogel beads: Adsorption isotherm, kinetic, and optimizing via Box-Behnken design optimization
    International Journal of Biological Macromolecules, 21 January 2025, In Press, Journal Pre-proof
    Authors: Gamil A.A.M. Al-Hazmi, Nadia H. Elsayed, Jawza Sh. Alnawmasi, Khadra B. Alomari, Ali Hamzah Alessa, Shareefa Ahmed Alshareef, A.A. El-Bindary
    
11. QbD-Driven preparation, characterization, and pharmacokinetic investigation of daidzein-l oaded nano-cargos of hydroxyapatite
    Scientific Reports volume 15, Article number: 2967 (2025)
    Authors: Namrata Gautam, Debopriya Dutta, Saurabh Mittal, Perwez Alam, Nasr A. Emad, Mohamed H. Al-Sabri, Suraj Pal Verma & Sushama Talegaonkar
    
12. Lubricity potentials of Azadirachta indica (neem) oil and Cyperus esculentus (tiger nut) oil extracts and their blends in machining of mild steel material
    Heliyon, Volume 11, Issue 2, 30 January 2025
    Authors: Ignatius Echezona Ekengwu, Ikechukwu Geoffrey Okoli, Obiora Clement Okafor, Obiora Nnaemeka Ezenwa, Joseph Chikodili Ogu
    
13. Process Evaluation and Analysis of Variance of Rice Husk Gasification Using Aspen Plus and Design Expert Software
    Chemistry Africa (2025)
    Authors: Ernest Mbamalu Ezeh, Isah Yakub Mohammed, Epere Aworabhi, Yousif Abdalla

Stat-Ease, Inc. and Ritme, scientific solutions hosted the 7th European DOE User Meeting & Workshop in Paris, France this past June. The DOE User Meeting was held at Le CNAM (the National Conservatory of Arts and Crafts) in the heart of Paris, close to the Louvre and Notre Dame. All agreed that this bi-annual event proved to be both informative and fun! The dinner cruise on the Seine was a highlight of the conference for all with gorgeous views of Paris landmarks and absolutely perfect weather. Vive la France!

Hello, Design-Expert® software users, Stat-Ease clients and statistics fans! I’m Rachel, the Client Specialist [ed. 2024: now I'm the Market Development Manager] here at Stat-Ease. If you’ve ever called our general line, I’m probably the one who picked up; I’m the one who prints and binds your workshop materials when you take our courses. I am not, by any stretch of the imagination, a statistician. So why am I, a basic office administrator who hasn’t taken a math class since high school, writing a blog post for Stat-Ease? It’s because I entered this year’s Minnesota State Fair Creative Activities Contest thanks to Design-Expert and help from the Stat-Ease consultant team.

I’m what you’d call a subject matter expert when it comes to baking challah bread. Challah is a Jewish bread served on Shabbat, typically braided, and made differently depending if you’re of Ashkenazi or Sephardi heritage. I started making challah with my mom when I was 8 years old (Ashkenazi style), and have been making it regularly since I left home for college. As I developed my own cooking and baking styles, I began to feel like my mother’s recipe had gotten a bit stale. So I’ve started to add things to the dough — just a little vanilla extract at first, then a dash of almond extract, then a batch with cinnamon and raisins, another one with chocolate chips, a Rosh Hashanah version that swaps honey for sugar and includes apple bits (we eat apples and honey for a sweet New Year), even one batch with red food coloring and strawberry bits for a breast cancer awareness campaign. None of these additions were tested in a terribly scientific way; I’m a baker, not a lab chemist. So when I decided I wanted to enter the State Fair with my challah this year, I got to wondering: what is actually the best way to make this challah? And lucky me, I’m employed at the best place in the world to find out.

I brought up the idea of running a designed experiment on my bread with my supervisor, and one of our statisticians, Brooks Henderson, was assigned to me as my “consultant” on the project. Before designing the experiment, we first needed to narrow down the factors we wanted to test and the results we wanted to measure. I set a hard line on not changing any of my mother’s original recipe — I know what Mom’s challah tastes like, I know it’s good, and I don’t want to mess with the complex chemistry involved in baking. We settled on adjusting the amount of vanilla and almond extracts I add to the dough, and since the Fair required me to submit a smaller loaf than Mom’s recipe makes, we tested the time and temperature required to bake. For our results, we asked our coworkers to judge 7 attributes of the bread, including taste, texture, and overall appeal. A statistician and I judged the color of each loaf and measured the thickness of the crust.

It sounds so simple, right? That’s what I thought: plug the factors into Design-Expert, let it work its magic, and poof! the best bread recipe. But that just shows you how little I know! If you’re a formulator, or you’ve taken our Mixture Design for Optimal Formulations workshop, you know what the first hurdle was: even though we only changed two ingredients, we were still dealing with a combined mixture/process design. Since mixture designs work with ratios of ingredients as opposed to independent amounts, adding 5g of vanilla extract and 3g of almond extract is a different ratio within the dough, and therefore a different mixture, than adding 2g of vanilla and 6g of almond. To make this work, the base recipe had to become a third part of the mixture. Consultant Wayne Adams stepped in at that point to help us design the experiment. He and Brooks built a mixture/numeric combined design that specified proportions of the 3 ingredients (base recipe, vanilla, and almond), along with the time and temperature settings.

Our second major problem was the time constraint. I brought up the idea for this bread experiment on July 18, and I had to bring my loaves to the fairgrounds on the morning of August 20. We wanted our coworkers to taste this bread, and I had a required family vacation to attend that first week of August. When we accounted for that, along with the time it took to design the experiment, we were left with just 14 days of tasting. At a rate of 2 loaves per weeknight, 4 per weekend, and at the cost of my social life, our maximum budget allowed for a design with only 26 runs. I’m sure there are some of you reading this and wondering how on earth I’d get any meaningful model out of a paltry 26 runs. Well, you’ve got reason to: we just barely got information I could use. Brooks ran through a number of different designs before he got one with even halfway decent power, and we also had to accept that, if there were any curvature to the results, we would not be able to model it with much certainty. Our final design had just two center points to find any curvature related to time or temperature, with no budgeted time for follow-up. Since our working hypothesis was that we’d see a linear relationship between time and temperature, not a quadratic one, the center points were to check this assumption and ensure it was correct. We got a working model, yes, but we took a big risk — and the fact that I didn’t even place in the top 5 entries only underlines that.

On top of all these constraints? I’m only human, and as you well know, human operators make mistakes. My process notes are littered with “I messed up and…” Example: the time I stacked my lunchbox on top of a softer loaf of challah in my bicycle bag for the half-hour ride to work. I’ll give you three guesses how that one rated on “uniformity” and “symmetry,” and your first two don’t count. If we had more time, we could have added more runs and gotten data that didn’t have that extra variability, but the fair submission date was my hard deadline. Mark Anderson, a Stat-Ease principal, tells me this is a common issue in many industries. When there is a “real-time rush to improve a product,” it may not be the best science to accept flawed data, but you make do and account for variations as best you can.

During the analysis, we used the Autoselect tool in Design-Expert to determine which factors had significant effects on the responses (mostly starting with the 2FI model). Another statistician here at Stat-Ease, Martin Bezener, just presented a webinar about this incredible tool — visit our web site to view a recording and learn more about it. When all of our tasters’ ratings were averaged together, we got significant models for Aroma, Appeal, Texture, Overall Taste, Color, and Crust Thickness, with Adj. R² values above 0.8 in most cases. This means that our models captured 80% of the variation in the data, with about 20% unexplained variation (noise) leftover. In general, the time and temperature effects seem to be the most important — we didn’t learn much about the two extracts. Almond only showed up as an effect (and a minor one at that) in one model for the aroma response, and vanilla didn’t show up at at all!

The other thing that surprised me was that I expected to be able to block this experiment. Blocking is a technique covered in our Modern DOE for Process Optimization workshop by which it’s possible to account for variation between any impossible-to-change source of variation, such as personal differences between tasters. However, since our tasters weren’t always present at every tasting and because we had so few runs in the experiment, we had too few degrees of freedom to block the results and still get a powerful model. It turned out that blocking wouldn’t have shown us much. We looked at a few individual tasters’ results individually, and that didn’t seem to illuminate anything different from what we saw before — which tells us that blocking the whole experiment wouldn’t have uncovered anything new, either.

In the end, I’m happy with our kludged-together experiment. I got a lot of practice baking, and determined the best process for my bread. If we were to do this again, I’d want to start in April to train my tasters better, determine appropriate amounts of other additions like chocolate chips, and really delve into ingredient proportions in a proper mixture design. And of course, I couldn’t have done any of this without the Stat-Ease consulting team. If you have questions on how our consultants can help design and analyze your experiments, send us an email.